- Combines all of the elements of a complex optical setup into a single monolithic unit.
- Superb optical stability, unsurpassed shock and vibration resistance.
- Sub-arc second accuracy between optical elements.
- Integrates different glass types and exotic materials such as KBr, ZnSe and CaF2, into one assembly.
- Especially useful when the system has to perform in broadband light applications, such as FTIR.
- Permanently aligned so you will never need to adjust it and also lasts indefinitely.
- Use in interferometer configurations, laser cavities, beam dividers, beam delivery systems, Boresighting and more.
Whether it's a military, space/aerospace or commercial applications, Incorporating Monolithic Optical Structure Technology™ (M.O.S.T.) into your design provides a wealth of benefits.
Engineers save a significant amount of initial time when integrating Monolithic Optical Structure Technology™ (M.O.S.T.) into a system since it is a pre-aligned block. Also, the long-term maintenance savings are enormous. Because we permanently align the assembly, it exhibits exceptional thermal, and mechanical stability, and never needs adjusting.
Use Monolithic Optical Structure Technology™ (M.O.S.T.) in interferometer configurations, laser cavities, beam dividers, beam delivery systems, Boresighting and much more.
Some sample applications:
Beam Separator
Separates one input beam with multiple wavelengths into 3 different outputs for metrology applications.
Monolithic scanning device
Designed to oscillate at a rate higher than 1KHz, while maintaining its stability and accuracy, this lightweight structure is balanced to reduce the moment of inertia about the pin axes.
PLX Interferometer
Based on our Monolithic Optical Structure Technology™ (M.O.S.T.) proprietary technology, it is especially useful when the system has to perform in broadband light applications, such as FTIR. This sandwich like structure assembly exhibits exceptional thermal and mechanical stability and lasts indefinitely.
PLX has used Monolithic Optical Structure Technology™ (M.O.S.T.) to manufacture optical structures incorporating from 2 to 5 optical elements, with typical clear apertures of 0.5" to 5" diameter. Larger or smaller clear apertures are also possible. PLX manufactures the majority of its Monolithic Optical Structure Technology™ (M.O.S.T.) units utilizing flat elements, but can also incorporate non-flat surfaces if output results are well-defined. In fact, PLX can customize a Monolithic Optical Structure Technology™ (M.O.S.T.) structure to incorporate virtually any special feature or configuration you require and can improve practically any lab setup you need to convert to an instrument.
All products can be modified to operate under unique and severe environmental conditions.
For more information, please visit our contact us page
